A smart lock that came with the house is a special case, and a locksmith treats it as a fresh installation. The device is reset to factory state following the maker's procedure, which clears codes, paired phones and schedules, and then re-enrolled under an account you create. Any hub, voice assistant or automation that had permission to open it is checked separately, because those permissions can outlive a reset on the lock itself. The mechanical override cylinder is rekeyed so the previous owner's key becomes scrap metal. Batteries are replaced, firmware is brought up to date, and the door alignment is checked as it would be for new hardware.
Sound familiar?Norham
Smart Lock Installation · Norham
Scene 1
Smart locks are built around the standard residential preparation, so the locksmith measures before choosing. Door thickness is usually between 35 and 45 millimetres; thicker doors need an extension kit and very thin ones may need a different model. The large cross bore for the cylinder, the smaller edge bore for the bolt and the backset from the door edge to the centre of the hole are each checked against the new lock's range. A lever set also needs the handing confirmed. Steel and fibreglass doors, doors with a mortise pocket from an older lock, and doors with glass close to the handle each change what will fit and how it is mounted.
Scene 2
Some smart locks mount only on the inside of the door and turn the deadbolt you already own, leaving the exterior face and the keyway as they were. Fitting one begins by checking that the existing deadbolt is on the model's compatibility list and that its tailpiece shape matches an adapter in the box. The interior thumb-turn is removed, the adapter fitted, and the motor unit clamped to the mounting plate so it sits square and turns the bolt through its full travel without slipping. Because the outside is untouched, these suit rented units where the landlord prefers the door unchanged, and older doors whose exterior hardware is worth keeping. The existing key keeps working alongside the phone.
Scene 3
The lock now belongs to your account, and the day-to-day control is yours. Adding a code for a new cleaner, setting a weekend window for a visiting relative or removing the dog walker who moved away is done from the app or the keypad in moments, without a locksmith and without cutting anything. A short list of who holds which code, kept somewhere private, is worth writing on day one so the door's access stays as tidy as it is today. Codes should be unique per person and never shared aloud on the step; where the lock offers one-time or scheduled codes, use them for trades and deliveries and let them expire.
What shapes the quoteCobourg Lock & Key Co.
FeesSame any hour
Only if the model you choose uses one to reach the internet. Some locks have Wi-Fi built into the interior unit and connect straight to your router. Others save battery by using Bluetooth at the door and a small plug-in bridge nearby to relay to the network. Locks designed for a home hub join whatever hub you already run. The locksmith checks signal strength at the door itself and recommends the arrangement that keeps the lock reliably connected.
They suit turnover well: a departing tenant's code is deleted and a new one created without cutting keys or wondering about copies. Two things to plan for. The tenant in place must always have a working way in, which usually means their own code plus a key to the override cylinder, and any lock change on an occupied unit is done with the tenant's knowledge. Set the administrator account up under the property, not a departing employee, so control stays with you.
Most models offer auto-lock, and it is one of the settings the locksmith configures with you. You choose the delay, from a few seconds to several minutes, and the lock throws the bolt on its own once the door has been closed that long. Models with a door sensor wait until the door is actually shut, which avoids the bolt extending into thin air. Families who have ever wondered whether the back door got locked tend to value this most.
NorthumberlandOntario
Smart Lock Installation · Cobourg, Alnwick/Haldimand, Brighton, Cramahe, Hamilton, Gosport, East Colborne, Coverdale, Codrington, Orland, Smithfield
Every square is one home in a hundred.
On-site assessment
You have just taken possession of the house and the previous owners handed over a keypad deadbolt with a code nobody wrote down and an app account you cannot get into.
(289) 677-1674, open 24/7.
On-site assessment preferred · (289) 677-1674, open 24/7
